Skip to product information
1 of 3

Mosconi

Mosconi PRO 4|10

Mosconi PRO 4|10

Regular price Sale price $1,207.00 USD
Sale Sold out

“The PRO amplifiers are among the most naturally and musically performing devices. They maintain the character of every peace of music and recording, and you even have the impression that the qualities of the pieces are lovingly refined. Even though the sound is perfectly detailed and superbly audible, the amplifiers are not prone to dissect it. Also, they provide just the right amount of warmth to meet our listening taste without sounding all too cuddly. Great sound walls are reproduced with impressive fullness, and rolls over the toms can certainly inspire with their power and vitality. In general, both PRO 4/10 and PRO 5/30 stand out due to their extremely dynamic music reproduction. Keystrokes and the sounds of string instruments are passed unfiltered to the listener, and drums, especially at higher listening volumes, bring an enthusiastic grin to his face. Nevertheless, the PRO-Amps never forget the big picture, the flow of music is always preserved nicely and the musical harmony created by the amplifiers is wonderful. This is an absolute high-end performance rendering the new Mosconis absolutely competitive.” – Car HiFi 2/2018

View full details
  • Features

    • 4 channel amplifier
    • Available in Black/Silver finishing
    • Power Rating: 120 Watt per channel @ 4 Ohm < 1% THD+N
    • Sn Ratio: > 74 dBA / >95 dBA (DDSP)  (ref: 1 Watt into 4 Ohm)

    (*) VERY IMPORTANT NOTE – READ CAREFULLY
    4 Ohm ST or 8 Ohm BTL – CONTINUOUS SINEWAVE SIGNAL – pure resistive load or speaker load
    2 Ohm ST or 4 Ohm BTL – MUSICAL SIGNAL – pure resistive load or speaker load
    2 Ohm – MUSICAL SIGNAL – – pure resistive load or speaker load (only CH5)

  • Specifications

    Target powers:

    • 120×4 Watt (Stereo) @ 4 Ohm
    • 160×4 Watt (Stereo) @ 2 Ohm
    • 320×2 Watt (BTL) @ 4 Ohm

    Input sensitivity: (Power rating ref)

    • 0.35V ÷ 12V (5.3V in DDSP mode) [CH1/2/3/4]

    Xover functions:

    • CH1/2= HP: 43 ÷ 500Hz(x1) or 430 ÷ 5000Hz(x10) [12 dB/oct – Q: 0.7]
    • CH3/4= HP: 50 ÷ 200Hz & LP:(430 ÷ 5000Hz) [12 dB/oct – Q: 0.7]

    Special features:

    • Direct DSP (bypass all the preamplifier circuitry but the differential input interface)
    • High Level / Low Level selectable input
    • RTC input
    • Internally controlled via Atmel Processor

    Size:

    • 235 x 205 x 55 mm

    Weight:

    • 2.4 Kg

Contact Us